Best Deal In North America On A 36 Volt Trolling Motor Battery Kit
3 x SunSaver Lithium Iron Phosphate (LiFeP04) 12 Volt 60 Amp Hour Deepcycle Battery With Capacity Display Connected In Series With Schauer JAC0436-R 36 Volt 4.0 AH Smart Charger & Victron BMV712 Battery Monitor:
• Compact and only 40% of the weight of comparable lead
• Up to 10 times more cycles than lead acid batteries
• Faster charging and lower self-discharge
• Delivers twice the power of lead acid batteries, even high
discharge rate, while maintaining high energy capacity
• Super safe chemistry reducing the risk of explosion or
combustion due to high impact, over-charging or short
• Rugged impact resistant ABS case and cover flame
retardant to UL94:V0
• Battery Management System (BMS) controls the parameters
of the battery to provide optimum safety and performance
• BMS enhanced design balances the battery cells and
protects against overcharging and discharging
Typical Capacity: 60 Ah
Nominal Voltage: 12.8 x 3 = 38.4 VDC
Weight: 7.5Kg (16.53 Lbs) x 3 = 23 Kg, 52 Lbs.
Dimensions: L 260 x W 519 x H 220mm (10.24 x 20.45 x 8.66”)
Battery Management: Short Circuit, Current, Voltage, Cell Balancing
Charging Method: CC – CV
Standard Charge Voltage: 43.2V
Standard Charge Current: 12A (0.2C)
Max Charge Current: 60A
Max Discharge Current: 60A
Cycle Life: 3000
Over Charge Voltage Protection: 43.8V
Over Discharge Voltage Protection: 30V
Over Current Discharge Protection: 100A
Short Circuit Protection: Cut out
Operation Temperature Range: Charge 0~55°C, Discharge -10~50°C, Storage -20~60°C
Parallel Connection: Not Allowed
Series Connection: Can Add 1 More 12 Volt Unit – 4 Units Max (48V, 60Ah)
Connector: M8 Screw Terminal
Warranty: 3 Year Free Replacement, 7 Additional Years Pro-Rated – 10 Years Total
Ingress Protection: IP65 (dust tight, rain water)
- Charge using only compatible charging systems
- Store at around 50% charge in cool, dry conditions
- Do not mix with other battery technologies directly
- Always charge at above freezing temperatures, unless configured properly
- Never over charge, over discharge, or over load your cell
- Ensure they are used within the proper operating temperature range
Here is some simple care info to help you maximize performance, protect your LiFePO4 battery and
LiFePO4 battery technology is among the safest available but can still be dangerous if
not handled or utilized properly, as with all batteries. LiFePO4 cells have some very specific
characteristics and must be treated differently from Lead based and other batteries. Once installed in a
proper system, they are very simple to maintain and utilize.
- Charging should be performed using a CC – CV (Constant Current – Constant Voltage) system.
- NEVER charge at or below freezing temperatures (0°C, 32°F).
- Optimal charge and discharge rates for longevity range from 0.1C to 0.5C.
- Store out of direct sunlight, in a cool, dry place to help avoid cell deterioration.
- Charge at least once every six months, when in storage, to combat self discharge. LiFePO4 cells generally do not like to rest in a fully charged or full discharged state for any period, this will accelerate capacity and performance loss.
- Standard operating range for usable Amp hour (Ah) capacity is 20% – 100%. Depth of Discharge (DoD) 80%.
- Batteries are shipped in a partial state of charge. Charge before using.
- If a pack becomes completely discharged for any period, charge to full immediately.