Victron Multiplus II 12/3000/120-50 Pure Sinewave Inverter/Charger 2x120V – PMP122305100 + Free Cables


Victron PMP123021102 or MultiPlus 12/3000/120-50 With Free Inverter Cables & Free Shipping

If you expect to have your system inspected by the local electrical authority it is highly recommended to upgrade to the cUL Listed Version Of This Model.

Add Powerboard Wall Mountable Pre-Wired Assembly For Easy Installation

Order Our Value Added Power Board Assembly. It Features A 39.25″ Wide x 33″ High Magnum Energy BP-D Wall Mounting Plate With A Midnite Solar MNDC-250 Disconnect (This Is Your Inverter Safety Shutoff – We Also Add A 63 Amp Solar Array Shut Off Breaker So You Can Safely Service Your Batteries Without Having To Disconnect Wires), And A Delta Lightning Protection Device Pre-Installed, Wired And Tested. Purchase Victron MPPT Charge Controller(s), BNV-712 Battery Monitor Or Color Control GX System Monitor And We Will Install And Wire Them On The Power Board Assembly At No Extra Charge.

Westrock’s Do-It-Yourself 50 Amp Install Kit Includes:

Purchase this product now and earn 39 Points! 1 Point = $2 Towards A Future Purchase


Victron Multiplus II 12/3000/120-50 2 x 120V – 120 Volt AC 3000 VA Output Pure Sine Wave Power Inverter With Integrated 50 Amp Charger And 50 Amp Transfer Switch – 12 Volt Input – With V.E. Bus

Designed For 50 Amp Trailer/RV Systems


Free 5 Foot Long 4/0 Ultraflex Inverter Cable Set Included Free Of Charge!! Plus Shipping On Victron Items Is Free!


The MultiPlus-II 2 x120V is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications. Whether it is supplied from shore power or a generator, the MultiPlus-II 2x120V can accept and passthrough both lines of a 120/240V supply, with the capability to utilize the full 50A for charging and AC loads. When connecting to a single phase 120V supply, the L1 input of the MultiPlus-II 2x120V will accept incoming power for charging and passthrough, while combining the L1 and L2 outputs for single-phase 120V on each line.

The Victron MultiPlus II 12/3000/120-50 switches to inverter operation when no AC source is available. The inverter output is also 120V single phase. In inverter mode, the MultiPlus-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the MultiPlus is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.

The MultiPlus-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.

Product Documentation

Similar Products:  Victron Multiplus Compact 12/2000/80-50 | Victron Multiplus 12/3000/120-50


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.